CK-13-AB Dual Medium Intensity White/Red Warning Beacon Light – ICAO Type A + Type B

Dual mode medium intensity white/red obstruction light for day/night time marking of structures that present a hazard to aviation: tall buildings, chimneys, cranes, towers. White Flashing day / Red Flashing night.

Product Name: A/B type Medium intensity aviation obstruction light

Product Model:CK-13

Working conditions:

Input voltage: AC100V-AC240V

Frequency: 50HZ/60HZ

Application: Suitable for installation on fixed buildings, structures, such as power towers, communication towers, chimneys, high-rise buildings, large bridges, large port machinery, large construction machinery, wind turbines and other obstacles to warn the aircraft.

COMPLIANCE

• ICAO ANNEX 14, Volume I, Chap. 6 Visual aids for denoting obstacles. Type A + Type B, Medium-Intensity obstacle light.

• FAA AC 150/5345-43 Specification for obstruction lighting equipment. Type L-865 + Type L-864, Medium-Intensity obstacle light.

  
  

APPLICATION

• cranes and high-rise buildings

• chimneys

• electricity pylons

• masts & tower obstacles(telecommunication, GSM, radio & TV)

• wind turbines/wind farm

• oil platforms
  

SPEC

KEY FEATURES

• Based on LED technology

• WHITE light - Flashing day-mode, RED light - Flashing night-mode

• Intensity: 20.000 cd day-mode; 2.000 cd night-mode

• Long lifetime >10 years life expectancy

• Low consumption

• Lightweight and compact

• Degree of Protection: IP65

• No RF-radiations

• Easy to install

• Wind resistance tested at 240km/h (150mph)

• Certified by Intertek & CAAC(Civil Aviation Administration of China)

OPTIONS

• Optional Infra-red (IR) 

• Optional GPS synchronization

• Optional DC power supply

• Optional Solar Powered

• Optional Dual Type, 1 duty + 1 standby

Precautions(please read before use)

1. All connections must be wired in strict accordance with the wiring diagram, otherwise the lamps may be damaged. Please check the logo and instructions carefully.

2. The power supply of this model controller is AC100V-AC240V, 50HZ/60HZ. Do not use other power sources, such as AC380V, as this may damage the lamps.

3. Avoid installing at the top and bottom of the building. If installed on the top floor of a building, it is best to connect the ground wire to the lightning protection belt or install a lightning rod to avoid lightning strikes.

4. When working on the product, it is forbidden to open any part of the lamp body to prevent danger.

5. This product will have a temperature rise during work, which is normal.

6. This product is a sealed structure. Non-professional maintenance personnel should not disassemble it. Once found, the company will not guarantee it.