CK-11L-TZ
Product Specification
| Item | Parameter |
| Model | CK-11L-TZ |
| Operating voltage | DC6.5V(Solar Power,steady burning or flashing) |
| Power consumption | 20-60times/min |
| Light source | RED LED |
| Peak light intensity | 32.5cd(±25%) |
| Life span | 100,000 hours |
| Emitting color | RED |
| Beam Angle | 360°horizontal beam angle |
| ≥3°vertical beam spread | |
| Overall size(mm) | Φ167mm*162mm |
| Installation size(mm) | Φ150mm-4*M12 |
| Ingress protection | IP65 |
| Lighting protection level | 5KA |
| Light controlled sensitivity | 100Lux |
| Operating temperature | -30℃┉60℃ |
| Net weight | 1.2kg |
| Wind load | 80m/s |
Features&Application
Solar panels by high low illumination mono-crystalline silicon wafer and using low iron tempered glass sealing, with high stability and long service life. Using lithium iron phosphate battery for energy storage, electrochemical conversion efficiency is high, the cycle life of more than 2000 times, with micro power consumption management system, the battery under voltage, overvoltage, floating, temperature all aspects to conduct a comprehensive protection, at the same time reduces the energy consumption of the control circuit itself, greatly improves the product reliability.
Widely used in various fields of the Air Force, civilian airports and obstacle free airspace, helipads, iron tower, chimney, ports, wind power plants, bridge and city high-rise buildings where require aviation warning.
Lamp shade of the light adopts PC with anti-UV which is high efficiency light transmission up to 90%, quite high impact resistance and fit the bad environment very well.
● House of the light is made of aluminum alloy and painted by spraying plastics,the structure is high strength, resistance to corrosion.
● Using Fresnel lens optical design, range further.
● Light source adopts LED with long lifespan up to 100,000hrs, lower power consumption and high efficiency.
● Based on the single chip computer automatic control, and also could be controlled by controller.
● Used the photosensitive probe fit for the natural ligh spectrum curve, automatic control light intensity level.
● The circuit of the light has surge protection whose lightning proof ability is In 7.5KA/5 times, Imax 15KA so that the light is suitable to harsh environment.
● Integral structure, protection lever of IP65.
● Ignitability rate UL-94V0, fit for all kinds of industrial situation.
● Could choose controller to control the synchronous switch function.
Function:
CK-11L-TZ is low intensity solar lights with photocell switch ,it can work automatically on evening ,work off in the day, The sensitivity of the switch is 50～100Lux.
Installation:
（1）Before install the light, please open the bottom of light, reference picture 1;
（2）Connect with Red-Black wire(reference as picture 2) , the red wire be connected the sign marked “R”,the black wire be connected the sign marked “B”, and then put the battery into the neck(reference picture 3 and picture 4) ;
（3）Finally, there are 4 roles, diameter is 6.8mm in the bottom, please use M6 screw to fix it and make sure install it under the horizontal state.
Testing:
After the battery installed, if you need to test lamps during the day, confirm the lamps to be opened, please use the opaque-material to cover chimney, the lamps began flashing work delay about 10 seconds, which is showing that it’s work.
Attention:
● To avoid affecting the lamp’s regular use and communications, the lamp needs to be installed more than 2 meters from the transmitting antenna and
● To avoid the strong radiation areas when need installed on the television transmission towers, radio towers, cell phone base stations which with strong radiation tower.
● If the transmitting power of the base station is higher than 500W, the lamp must be installed more than 3 meters from the antenna.
● Besides, in order to avoid being struck by lightning, the lamp is prohibited to install on the top or the edge of the architecture.
Bracket installation:
A、anchor ear mounting bracket
B、vertical steel angle mounting bracket
