High Intensity LED Aviation Obstruction Light Type B (90°), multi-LED type compliant to ICAO (Type B) and FAA (Type L-857). it used to indicate the presence of structures whose height above the level of the surrounding ground exceeds 150m.
High Intensity Led Aviation Obstruction Light type A compliance ICAO
a) Product Feature:Low power consumption, easy installation, high brightness, small size.
b) Application：It is suitable for installation on buildings, structures, such as electric power towers, communication towers, chimneys, high-rise buildings, large bridges, large port machinery, large construction machinery, wind turbines and other obstacles to warn the aircraft.
c) Type:Type A High Intensity Obstruction lights
d) Environmental conditions：
Working temperature: -40?C ┉ +55?C; Relative humidity: 0% ~ 95%;
Wind power: no more than 240km/h; rain: exposed to rain in any wind direction;
Salt spray: exposed to salt spray; irradiation: exposed to solar radiation.
e) Working conditions: input： AC220V±20%
f) Impact on the environment and energy: No
All wiring must be wired in strict accordance with the wiring diagram, otherwise the light may be damaged. Please check the logo and instructions carefully.
lThe power supply for this model controller is AC220V±20%, 50HZ/60HZ. Do not use other power sources, such as AC380V, as this may damage the lamps.
Avoid installing at the top and bottom of the building. If installed on the top floor of a building, it is best to connect the ground wire to the lightning protection belt or install a lightning rod to avoid lightning strikes.
When working on the product, it is strictly forbidden to open any part of the lamp body to prevent danger.
This product will have a temperature rise during operation, which is normal.
This product is a sealed structure. Non-professional maintenance personnel should not disassemble it. Once found, the company will not guarantee it.
Compliance
* ICAO ANNEX 14 High Intensity Aviation Obstruction light type A
Specification
● The house of light adopts high quality aluminium alloy, the light emitting surface use tempered glass, the structure is high strength, resistance to corrosion.
● Use the special optical reflector design, the visual range further,the angle more accurately, no light pollution.
● Light source adopts import high quality LED, lifespan up to 100,000 hours, low power consumption, energy efficiency and environment protection.
● Based on the single chip computer control, automatic identification sync signal, do not distinguish the main light and auxiliary light, and also could be controlled by the controller.
● Same power supply voltage with synchronous signal, integrate in power supply cable, eliminate the damage by error installation caused.
● Used the photosensitive probe fit for the natural light spectrum curve, automatic control light intensity level.
● The circuit of the light has surge protection, so that the light is suitable for a harsh environment.
● Integral structure, protection level of IP65.
● GPS synchronizing function is available.
OPTIONS
* White light flashing on day and night Type A
* White light flashing on day and night Type B
* Built-in GPS Sync and Photocell
* Stainless Steel Installation bracket
* Solar Power System
