International Tel: +86 731 8556 3265 E-mail: info@chendongtech.com
Get A Quote
  • Medium Intensity Type A/B Aviation Obstruction Light
  • Medium Intensity Type A/B Aviation Obstruction Light
  • Medium Intensity Type A/B Aviation Obstruction Light
  • Medium Intensity Type A/B Aviation Obstruction Light
  • Medium Intensity Type A/B Aviation Obstruction Light
  • Medium Intensity Type A/B Aviation Obstruction Light
  • Medium Intensity Type A/B Aviation Obstruction Light

Medium Intensity Type A/B Aviation Obstruction Light

Model: CK-13

Product Description

Specification:

ItemParameter
Operating voltageAC220V
Power consumption≤40W(day), ≤15W(night)
Flashing frequency20~60times/min.
Light intensity20000cd(day), 2000cd(night)
Light sourceWhite/Red LED
Lifespan>100,000 hours
Emitting colorWhite(day)/Red(night)
Beam angle360° horizontal beam angle
≥3° vertical beam spread
Method of synchronizationSame power supply voltage signal mode
Overall size(mm)Ф268mm×206MM
Installation size(mm)240mm*240mm-4*M12
Ingress protectionIP65
Lightning protection level15KA
Photocell sensitivity50Lux
Ambient temperature-55℃~55℃
Net weight7kg
Wind load80m/sec.


Application:
Widely used in various fields of the Air Force, civilian airports and obstacle free airspace, helipads, iron tower, chimney, ports, wind power plants, bridge and city high-rise buildings where require aviation warning.

Usually used above 45m and less than 150m buildings.


Features:

● Cover of the light adopts PC with anti-UV which is high efficiency light transmission up to 90%, quite high impact resistance and fit the bad environment very well; 

● House of the light is made of aluminum alloy and painted by spraying plastics, the structure is high strength, resistance to corrosion;

● Use the special optical reflector design, the visual range further, angle more accurate, no light pollution.

● Light source adopts import high quality LED, lifespan up to 100,000 hours, low power consumption, energy efficiency and environment protection.

● Based on the single chip computer control, automatic identification sync signal, do not distinguish the main light and auxiliary light, and also could be controlled by controller.

● Same power supply voltage with synchronous signal, integrate in power supply cable, eliminate the damage by error installation caused.

● Used the photosensitive probe fit for the natural light spectrum curve, automatic control light intensity level.

● The circuit of the light has surge protection, so that the light is suitable to harsh environment

● Integral structure, protection lever of IP65

● GPS synchronizing function is available


Top