International Tel: +86 731 8556 3265 E-mail: info@chendongtech.com
Get A Quote
  • CK-11L type B  Medium Intensity Aviation Obstruction Light
  • CK-11L type B  Medium Intensity Aviation Obstruction Light
  • CK-11L type B  Medium Intensity Aviation Obstruction Light
  • CK-11L type B  Medium Intensity Aviation Obstruction Light
  • CK-11L type B  Medium Intensity Aviation Obstruction Light
  • CK-11L type B  Medium Intensity Aviation Obstruction Light
  • CK-11L type B  Medium Intensity Aviation Obstruction Light
  • CK-11L type B  Medium Intensity Aviation Obstruction Light

CK-11L type B Medium Intensity Aviation Obstruction Light

Model: CK-11L

Product Description

Specification:

ItemParameter
Operating voltageAC220V
Power consumption≤5W
Flashing frequencySteady burning
Light intensity≥32cd
Light sourceRed LED
Lifespan>100,000 hours
Emitting colorRed
Beam angle360° horizontal beam angle
≥10° vertical beam spread
Method of synchronizationSame power supply voltage signal mode
Overall size(mm)Ф150mm×230MM
Installation size(mm)125mm-4*M10
Ingress protectionIP65
Lightning protection level10KA
Photocell sensitivity100Lux
Ambient temperature-40℃~55℃
Net weight1.5kg
Wind load80m/sec.


Application:
Widely used in various fields of the Air Force, civilian airports and obstacle free airspace, helipads, iron tower, chimney, ports, wind power plants, bridge and city high-rise buildings where require aviation warning.

Usually used below 45m


Features:

● 1. Lamp shade of the light adopts PC with anti-UV which is high efficiency light transmission up to 90%, quite high impact resistance and fit the bad environment very well.

● 2. House of the light is made of aluminum alloy and steel, painted by spraying plastic, the structure is high strength ,resistance to corrosion

● 3. Using Parabolic reflector optical design, range further

● 4. Light source adopts LED with long life-span ,lower power consumption and high efficiency

● 5. Based on the single chip computer control , automatic identification sync signal ,do not distinguish the main light and auxiliary light ,and also could be controlled by controller

● 6. Same power supply voltage with synchronous signal , integrate in power supply cable ,eliminate the damage by error installation caused

● 7. Used the photosensitive probe fit for the natural light spectrum curve, automatic control light intensity level.

● 8. The circuit of the light has surge protection whose lightning proof ability is In 7.5KA/5 times, Imax 15KA so that the light is suitable to harsh environment

● 9. Integral structure, protection lever of IP65.

● 10. Synchronizing function is available

Top