International Tel: +86 731 8556 3265 E-mail: info@chendongtech.com
Get A Quote
  • High Intensity Aviation Obstruction Light type A
  • High Intensity Aviation Obstruction Light type A
  • High Intensity Aviation Obstruction Light type A
  • High Intensity Aviation Obstruction Light type A
  • High Intensity Aviation Obstruction Light type A
  • High Intensity Aviation Obstruction Light type A
  • High Intensity Aviation Obstruction Light type A
  • High Intensity Aviation Obstruction Light type A
  • High Intensity Aviation Obstruction Light type A

High Intensity Aviation Obstruction Light type A

Model: CM-18

Product Description

Specification:


ItemParameter
Operating voltageAC220V
Power consumption≤100W
Flashing frequency40~60times/min.
Light sourceWhite LED
Light intensityBackground LuminanceLight Intensity
≤50Lux2000cd(±25%)
50~500Lux20000cd(±25%)
>500Lux200000cd(±25%)
Lifespan>100,000 hours
Emitting colorWhite
Beam angle90° horizontal beam angle
3-7° vertical beam spread
Method of synchronizationSame power supply voltage signal mode
Overall size(mm)470mm×204mm×134mm
Installation size(mm)445mm×70mm×4-M10
Ingress protectionIP65
Lightning protection level10KA
Operating temperature-40℃~55℃
Net weight8kg
Wind load80m/sec.



Application:

Widely used in various fields of the Air Force, civilian airports and obstacle free airspace, helipads, iron tower, chimney, ports, wind power plants, bridge and city high-rise buildings where require aviation warning.

Usually used above 150m buildings, could use alone, also could use with Medium OBL type B and Low intensity OBL type B together


Features:
The house of the light adopts high quality aluminium alloy, the light emitting surface use tempered glass, the structure is high strength, resistance to corrosion

● Use the special optical reflector design, the visual range further, angle more accurate, no light pollution.

● Light source adopts import high quality LED, lifespan up to 100,000 hours, low power consumption, energy efficiency and environment protection.

● Based on the single chip computer control, automatic identification sync signal, do not distinguish the main light and auxiliary light, and also could be controlled by controller.

● Same power supply voltage with synchronous signal, integrate in power supply cable, eliminate the damage by error installation caused.

● Used the photosensitive probe fit for the natural light spectrum curve, automatic control light intensity level.

● The circuit of the light has surge protection, so that the light is suitable to harsh environment

● Integral structure, protection lever of IP65

● GPS synchronizing function is available

Top